1346 Chemical St. |  Dallas |  TX  |  75207
Phone: 214-234-8423 | efax: 214-234-8430
Hours: 8:30 AM –5:30 PM  Monday – Friday

Still & Motion
Equipment Rentals

Studio Rentals
Sales and Tech Services

Arri Sky Panels

Arri knocks it out of the park with its LED light fixture lineup

With awesome power and flexibility, the SkyPanel produces beautifully clean light with a single soft shadow. Perfect for broadcast and theatrical applications!

With a light output of 162fc at 9.8 feet, the SkyPanel is extremely bright. Use diffusion panels for softer washes, or blast the light full on, all without LED color banding or splotches.

Arri Sky Panel Adjustable Color

The SkyPanel’s biggest strength is it's CCT control, harness vivid color selection and saturation adjustments to produce a plethora of warm and cool white light or deep saturated colors. When it’s time to dim, enjoy a very smooth curve, fading to zero without unwanted flickering or stepping.

However, creating shadows is just as impressive. With its wide aperture and variety of LED light sources, the shadows produced are soft and uniform — no multiples, strange colors or LED artifacts.

Finally, Arri ties is all together with the S60’s flexibility. With a mere 5.24” depth, the SkyPanel can squeeze its way into the tightest of spots. Its shape allows it to be used discreetly as a footlight, while its remotely located power supply provides for a greater variety of positioning options.

ARRI SkyPanel Features from ARRI on Vimeo.


Arri SkyPanel Technical Data

Lamphead S60-C
Optical System Soft Diffusion Panel
Light Aperture 645 x 300 mm / (25.4 x 11.8 inches)
Beam Angle 115º (Half Peak Angle)
Weight Manual Version: 11.7 kg (25.8 lbs) Pole Op Version: 12.8 kg (28.1 lbs)

Steel Yoke, High Strength Tilt Lock

Pole Operation Option (Pan & Tilt)

Mounting 28 mm Spigot (Junior Pin)
Tilt Angle +/- 90º
Lamphead Voltage Input 48 V DC
Power Consumption 420 W Nominal, 450 W Maximum
Lamphead Power Connection Male 3-Pin XLR - 15 amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range 23 - 36 V DC
Battery Mode Light Output 50% of Total Output
White Light 2800K - 10000K Continuously Variable Correlated Color Temperature
Colored Light Full RBG+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance +/-100K (nominal), +/-1/8 Green-Magenta (nominal)
Color Rendition

CRI Average > 95

TLCI Average > 90

Green-Magenta Adjustment Continuously Adjustable (Full Minusgreen to Full Plusgreen)
Dimming 0 - 100% Continuous
Control On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN Network Connectivity, USB-A
Remote Device Management (RDM*) DMX Setup, Hour Counter and Standard RDM Commands
Software Interface Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A: Software upgrade via flash drive
Housing Color Blue/Silver, Black
Ambient Temperature Operation -20 - 45ºC (-4 - 113ºF)
Protection Class IP 20
Estimated LED Lifetime (L70) 50,000 hours
Estimated Color Shift Over Liftetime +/- 5% K
Certifications CE, FCC; GS, cNRTL, CB
Power Supply Unit S60 PSU
Power Supply Input Range 110 - 240 V AC, 50/60 Hz
Power Supply Output Rnage 48 V DC
Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)
Power Output Connection Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight 3.5 kg (7.7 lbs.)
Dimension 383 x 192 x 90 mm (15 x 7.6 x 3.5 inch)
Control On-Board On/Off Switch
Mounting Super Clamp Attachment / SkyPanel PSU Rail Mount
  * RDM Available in Future Firmware