Arri Skypanel S60-C


Arri Skypanel S60-C *Firmware v 2.0* w/ Barndoors

SKU: N/A Categories: , , ,


ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the ARRI SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8″ and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W. Pairs with the Arri honeycomb grid.

Additional information

Days Needed

1 Day, 2 Days, Weekly, Weekend

Rental Rates

  • DAILY $223

  • WEEKLY $675

All Arri lighting rentals require insurance to protect not only our equipment, but also the renter.
Please provide a Certificate of Insurance to have on file prior to the pick up of your rental.


  • Lamp Head
  • Ballast
  • Power Cable
  • Head Cable
  • Standard Diffusion Panel
  • Quick Mount Attachment Plate
  • Barndoors


Arri Website


  • Fully Tuneable from 2,800 K – 10,000 K
  • Plus/Minusgreen correction
  • Vibrant Color Selection (RGB+W Color Gamut)
  • Hue and Saturation Control
  • High Color Rendering
  • Low Power Consumption (420 W Nominal)
  • Tremendous Output – Brighter than 2kW Tungsten Soft Light
  • Fully Dimmable from 0-100%
  • Interchangeable Diffusion Panels
  • Thin Profile
  • On-Board Battery Connection (23 – 36V DC)
  • Onboard Simple Control Panel
  • Onboard DMX In and Out
  • RDM Implementation
  • USB-A Connection for Firmware Updates
  • EtherCon port or network connectivity
  • Fan Mode Selection
  • External Lightweight PSU
  • PowerCON TRUE1 Power Connector


This Lighting Fixture is compatible with both HMI and Tungsten light sources.



Optical SystemSoft Diffusion Panel
Light Aperture645 x 300 mm / 25.4 x 11.8″
Beam Angle115º (Half Peak Angle)
WeightManual Version: 11.7 kg / 25.8 lbs
HandlingSteel Yoke, High Strength Tilt Lock
Mounting28mm Spigot (Junior Pin)
Tilt Angle+ / -90º
Lamphead Voltage Input48 V DC
 Power Consumption 420 W Nominal, 450 W Maximun
Lamphead Power Connection Male 3-Pin XLR – 15 amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector Male 4-Pin XLR – 10 amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range23 – 26 V DC
Battery Mode Light Output50% Total Output
White Light2,800 K – 10,000 K Continuously Variable Correlated Color Temperature
Colored Light Full RGB+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance + / -100 K (Nominal)

+ / – 1/8 Green-Magenta (Nominal)

 Color Rendition CRI Average > 95

TLCI Average > 90

Green-Magenta AdjustmentContinuously Adjustable (Full Minusgreen to Full Plusgreen)
Dimming0-100% Continuous
 Control On-Board Controller, 5-Pin DMX In and Through

EtherCON LAN Network Connectivity


Remote Device Management (RDM) DMX Setup, Hour Counter, and Standard RDM Commands
 Software Interface Ethernet: DMX Setup, Fixture Status, and Firmware Upgrade Through PC

MAC USB-A: Software Upgrade Via Flash Drive

Housing ColorBlue/Silver
Ambient Temperature Operation-20º – 45º C / -4 – 113º F
Protection ClassIP20
Estimated LED Lifetime (L70) 50,0000 Hours
Estimated Color Shift Over Lifetime + / – 5% K
 Certifications CE, FCC; GS, cNRTL, CB
Power Supply UnitS60 PSU
Power Supply Output Range48 B DC
Power Input ConnectionPowerCON TRUE 1 (Bare Ends / Schuko / Edison Cable Available)
Power Output ConnectionFemale 3-Pin XLR – 10 Amp (Pin 1: Negative / Pin 2: Positive)

PowerCON True 1 (Mains Power Through)

Weight 3.5 kg / 7.7 lbs
Dimension 383 x 192 x 90 mm / 15 x 7.6 x 3.5″
Control On-Board On ? Off Switch
MountingSuper Clamp Attachment / SkyPanel PSU Rail Mount


Arri SkyPanel Features