Arri Skypanel S60-C *Firmware v 4.1*
Arri Skypanel S60-C
$225.00 – $675.00
- Description
- Additional information
- Rental Rates
- Includes
- Resources
- Overview
- Compatibility
- Add-ons
- Specs
- Videos
Description
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the ARRI SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8″ and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W. Pairs with the Arri honeycomb grid.
Rental Rates
-
DAILY $223
-
WEEKLY $675
All Arri lighting rentals require insurance to protect not only our equipment, but also the renter.
Please provide a Certificate of Insurance to have on file prior to the pick up of your rental.
Includes
- Lamp Head
- Ballast
- Power Cable
- Head Cable
- Standard Diffusion Panel
- Quick Mount Attachment Plate
Resources
Overview
- Fully Tuneable from 2,800 K – 10,000 K
- Plus/Minusgreen correction
- Vibrant Color Selection (RGB+W Color Gamut)
- Hue and Saturation Control
- High Color Rendering
- Low Power Consumption (420 W Nominal)
- Tremendous Output – Brighter than 2kW Tungsten Soft Light
- Fully Dimmable from 0-100%
- Interchangeable Diffusion Panels
- Thin Profile
- On-Board Battery Connection (23 – 36V DC)
- Onboard Simple Control Panel
- Onboard DMX In and Out
- RDM Implementation
- USB-A Connection for Firmware Updates
- EtherCon port or network connectivity
- Fan Mode Selection
- External Lightweight PSU
- PowerCON TRUE1 Power Connector
Compatibility
This Lighting Fixture is compatible with both HMI and Tungsten light sources.
Specs
Specs | Details |
---|---|
Lamphead | S60-C |
Optical System | Soft Diffusion Panel |
Light Aperture | 645 x 300 mm / 25.4 x 11.8″ |
Beam Angle | 115º (Half Peak Angle) |
Weight | Manual Version: 11.7 kg / 25.8 lbs |
Handling | Steel Yoke, High Strength Tilt Lock |
Mounting | 28mm Spigot (Junior Pin) |
Tilt Angle | + / -90º |
Lamphead Voltage Input | 48 V DC |
Power Consumption | 420 W Nominal, 450 W Maximun |
Lamphead Power Connection | Male 3-Pin XLR – 15 amp (Pin 1: Negative / Pin 2: Positive) |
Battery Connector | Male 4-Pin XLR – 10 amp (Pin 1: Negative / Pin 4: Positive) |
Battery DC Voltage Range | 23 – 26 V DC |
Battery Mode Light Output | 50% Total Output |
White Light | 2,800 K – 10,000 K Continuously Variable Correlated Color Temperature |
Colored Light | Full RGB+W Color Gamut with Hue and Saturation Control |
Color Temperature Tolerance | + / -100 K (Nominal)
+ / – 1/8 Green-Magenta (Nominal) |
Color Rendition | CRI Average > 95
TLCI Average > 90 |
Green-Magenta Adjustment | Continuously Adjustable (Full Minusgreen to Full Plusgreen) |
Dimming | 0-100% Continuous |
Control | On-Board Controller, 5-Pin DMX In and Through
EtherCON LAN Network Connectivity USB-A |
Remote Device Management (RDM) | DMX Setup, Hour Counter, and Standard RDM Commands |
Software Interface | Ethernet: DMX Setup, Fixture Status, and Firmware Upgrade Through PC
MAC USB-A: Software Upgrade Via Flash Drive |
Housing Color | Blue/Silver |
Ambient Temperature Operation | -20º – 45º C / -4 – 113º F |
Protection Class | IP20 |
Estimated LED Lifetime (L70) | 50,0000 Hours |
Estimated Color Shift Over Lifetime | + / – 5% K |
Certifications | CE, FCC; GS, cNRTL, CB |
Power Supply Unit | S60 PSU |
Power Supply Output Range | 48 B DC |
Power Input Connection | PowerCON TRUE 1 (Bare Ends / Schuko / Edison Cable Available) |
Power Output Connection | Female 3-Pin XLR – 10 Amp (Pin 1: Negative / Pin 2: Positive)
PowerCON True 1 (Mains Power Through) |
Weight | 3.5 kg / 7.7 lbs |
Dimension | 383 x 192 x 90 mm / 15 x 7.6 x 3.5″ |
Control | On-Board On ? Off Switch |
Mounting | Super Clamp Attachment / SkyPanel PSU Rail Mount |