Pro-10 2400 AirTTL


Profoto Pro-10 2400 AirTTL Power Pack

SKU: N/A Categories: ,


Profoto Pro-10 2400 AirTTL Power Pack

The 2-outlet Profoto Pro-10 2400 AirTTL Power Pack recycles in 0.02 to 0.7 sec, faster than its Pro-8 predecessor, and is capable of quick bursts up to 50 flashes per second. The power range has also expanded to 11 stops (2.4 – 2400Ws), selectable in full or 1/10 stop increments on its high resolution display. Action and special effects shooters will appreciate significantly faster flash durations as short as 1/80,000 sec. The pack also supports High Speed Sync (HSS) up to 1/8000 sec for managing output in full daylight, creative use of wide apertures or freezing action. Firmware updates are easily installed via the pack’s USB port.

Additional information

Days Needed

, , ,

Rental Rates

  • DAILY $125

  • WEEKLY $375

All rentals require insurance to protect not only our equipment, but also the renter.

Please provide a Certificate of Insurance to have on file prior to the pick up of your rental.


  • Power Pack
  • Power Cable
  • Sync Cord




  • X-fade White Light
  • Low Profile
  • Self Ballasted
  • Dimmer Compatible
  • Expandable & Stackable
  • Energy Efficiency
  • 2400Ws from 2 outlesbuilt-in TTL receiver
  • Optional Nikon, canon, sony ttl remotes
  • Wireless TTL and power ratio from 330’flash durations as short as 1/80,000
  • ecrecycling: 0.02-0.7 Sec11
  • Stop power variation (2.4 – 2400 Ws)
  • Single End Power Inupt
  • High CRI & TLCI Readings


This Power Pack is compatible with the Profoto Pro plus heads, Profoto twin heads, Profoto B1



Maximum Watt/Seconds


guide number at 6.5’ 100 ISO with ProHead and Magnum Reflector: 128
recycle time 0.02 to 0.7 Second  quick burst up to 50 flashes per second
flash duration normal mode (t0.5): 1/12,000- 1/800 sec min/max power                                              freeze mode (t0.5): 1/80,000 – 1/1000 sec min/max power
flash variability 2.4 to 2400Ws over an 11-stop range in 1/10 or 1/1 increments
distribution fully asymmetric
head outlets


flash ready indicator audible and visible
operating voltage 100-240 VAC, 50/60 Hz
sync voltage compliant to ISO 10330 standard
built in slave cell IR/Slave photocell                                  built in AirTTL receiver                                fully integrated with other AirTTL flashes such as B1, B2, and D2
circuit protection slow-blow fuse 16A/230V, 20A/110V
Fan cooled yes
auto dump yes
dimensions 11.4×8.3×11.8
weight 29.8 lb
Go to Top