Profoto Pro-10 2400 AirTTL Power Pack with 1 Prohead Plus
Pro-10 2400 AirTTL with 1 ProHead
$145.00 – $435.00
- Description
- Additional information
- Rental Rates
- Includes
- Resources
- Overview
- Compatibility
- Add-ons
- Specs
Description
Profoto Pro-10 2400 AirTTL Power Pack
The 2-outlet Profoto Pro-10 2400 AirTTL Power Pack recycles in 0.02 to 0.7 sec, faster than its Pro-8 predecessor, and is capable of quick bursts up to 50 flashes per second. The power range has also expanded to 11 stops (2.4 – 2400Ws), selectable in full or 1/10 stop increments on its high resolution display. Action and special effects shooters will appreciate significantly faster flash durations as short as 1/80,000 sec. The pack also supports High Speed Sync (HSS) up to 1/8000 sec for managing output in full daylight, creative use of wide apertures or freezing action. Firmware updates are easily installed via the pack’s USB port.
Rental Rates
-
DAILY $125
-
WEEKLY $375
All rentals require insurance to protect not only our equipment, but also the renter.
Please provide a Certificate of Insurance to have on file prior to the pick up of your rental.
Includes
- Power Pack
- Power Cable
- Sync Cord
Resources
Overview
- X-fade White Light
- Low Profile
- Self Ballasted
- Dimmer Compatible
- Expandable & Stackable
- Energy Efficiency
- 2400Ws from 2 outlesbuilt-in TTL receiver
- Optional Nikon, canon, sony ttl remotes
- Wireless TTL and power ratio from 330’flash durations as short as 1/80,000
- ecrecycling: 0.02-0.7 Sec11
- Stop power variation (2.4 – 2400 Ws)
- Single End Power Inupt
- High CRI & TLCI Readings
Compatibility
This Power Pack is compatible with the Profoto Pro plus heads, Profoto twin heads, Profoto B1
Specs
Maximum Watt/Seconds |
2400 |
guide number | at 6.5’ 100 ISO with ProHead and Magnum Reflector: 128 |
recycle time | 0.02 to 0.7 Second quick burst up to 50 flashes per second |
flash duration | normal mode (t0.5): 1/12,000- 1/800 sec min/max power freeze mode (t0.5): 1/80,000 – 1/1000 sec min/max power |
flash variability | 2.4 to 2400Ws over an 11-stop range in 1/10 or 1/1 increments |
distribution | fully asymmetric |
head outlets |
2 |
flash ready indicator | audible and visible |
operating voltage | 100-240 VAC, 50/60 Hz |
sync voltage | compliant to ISO 10330 standard |
built in slave cell | IR/Slave photocell built in AirTTL receiver fully integrated with other AirTTL flashes such as B1, B2, and D2 |
circuit protection | slow-blow fuse 16A/230V, 20A/110V |
Fan cooled | yes |
auto dump | yes |
dimensions | 11.4×8.3×11.8 |
weight | 29.8 lb |